- Categories
- Health
- Cardiovascular System Health
- Pulse Rate
Download Article
Explore this Article
IN THIS ARTICLE
1Purchase a stethoscope if you do not already have one.
2Find a way to keep time.
3Take off unnecessary layers.
4Place the earpieces in your ears.
5Check to see if you can hear a sound.
6Position the chestpiece correctly.
7Get your timepiece ready to watch.
8Start counting.
9Calculate BPM.
10Repeat if required.
+Show 7 more...
-Show less...
Other Sections
Video
Tips and Warnings
Related Articles
Expert Interview
References
Co-authored byJoel Warsh, MD
Last Updated: November 2, 2024Approved
Download Article
Whether you are simply curious or have been advised by a doctor, you can use a stethoscope to listen to your own heartbeat and measure your pulse. This article will walk you through how to use a stethoscope on yourself, how to count your heartbeats, and how to turn your measurement into a BPM calculation. Read on for more info!
1
Purchase a stethoscope if you do not already have one.
Download Article
2
Find a way to keep time.
Download Article
3
Take off unnecessary layers.
Download Article
To take your pulse, you will be listening to your heart through your chest. Depending on the quality of your stethoscope you can usually listen through about two T-shirt layers of clothing (just for the beats, not quality). Take any extra heavy clothing off if you cannot hear your heart clearly.
Advertisement
4
Place the earpieces in your ears.
Download Article
Be sure not to put them in backwards. The earpieces of the stethoscope are usually angled and in order to hear correctly and have them be comfortable you need to place the tips in facing FORWARD, in the direction that you are looking. If they are not comfortable, you may gently bend them forward or backwards to get a good fit.[1]
5
Check to see if you can hear a sound.
Download Article
The piece that goes on your chest is called the chestpiece. Many stethoscopes have chestpieces with two sides that can be rotated around the tubing to better hear high frequency and low frequency lung sounds, a diaphragm and a bell. When one is in use the other cannot be used. With the earpieces in your ears, GENTLY rub the diaphragm side (the one with the flat plastic piece) of the stethoscope and listen for a sound. If you do not hear a sound, turn the chest piece over (you should hear it click into position) and try again. This should resolve any issues.[2]
Advertisement
6
Position the chestpiece correctly.
Download Article
Position the chestpiece on your chest, find the imaginary line between your nipples. You want to put the chestpiece diaphragm side down on that line slightly to your left of center. Experiment to find where you can hear your heart best. If you are having trouble and still cannot find it, it may be helpful to lie down or lean forward slightly while doing this.[3]
7
Get your timepiece ready to watch.
Download Article
You are now ready to count your heart beat for a given time period. When you listen to the heart, remember that it has TWO beats, which represent the succession of valves in your heart contracting to pump blood (lub-dub lub-dub). HOWEVER ONLY ONE OF THOSE BEATS IS COUNTED IN YOUR PULSE. The first beat is usually stronger and it is recommended only listening to that beat and tuning the first one out.[4]
Advertisement
8
Start counting.
Download Article
Look at the second hand on your watch/clock, and when the second hand hits one of the 5 minute markers start counting the beats through your scope. In a clinical setting they typically count the pulse for 30 SECONDS as this is the minimum that is considered accurate. As mentioned earlier, you do not need to note each time the second hand moves, keeping track of that is too much work! Instead, look at where the second hand WILL end up at the end of 30 seconds.
- For example, if you start counting at the "2" mark, the hand will have passed 30 seconds at the "8" marker, or if you start at 12, 30 sec. will be at 6. Stop counting beats when the second hand reaches the marker and 30 seconds have elapsed. If you would like to be even more accurate (because the pulse is not always completely regular), you may count beats for 1 minute.[5]
9
Calculate BPM.
Download Article
If you counted for an entire minute you are all set and have your pulse. However, in most cases you now need to do a little math because pulse values are expressed in beats per minute (BPM). You counted the beats for 30 seconds, but as there are 60 seconds per minute you must multiply that by 2 to get beats per 60 seconds.
- For example, if you counted your pulse at 36 beats over 30 seconds, your pulse would be 72 because 36beats/30seconds = 72beats/60seconds. If, for some reason, you counted beats for only 15 seconds (as is sometimes done in moving ambulances because taking pulses is a PAIN in there), you would need to multiply by 4 as 15 x 4 = 60 = bpm.[6]
Advertisement
10
Repeat if required.
Download Article
Pulse does fluctuate relatively regularly, but repeat if you think your pulse was unusually high or low. For example, if your measured pulse is 15-20 bpm off your normal, you should definitely repeat this process to make sure you were accurate, and repeat successively until your measurements are relatively similar. And that's all there is to it.
Expert Q&A
Question
Why am I getting static on my stethoscope?
Arvind Madan
NephrologistArvind Madan is a Nephrologist based in Orlando, Florida. With over 23 years of experience, Arvind works as a Physician at Central FL Kidney Specialists and is the Principal Investigator of the research division there. Arvind is certified by the American Board of Internal Medicine, with a sub-specialty in Nephrology. He is an Assistant Professor of Internal Medicine at the University of Central Florida’s College of Medicine. He is also an Assistant Professor of Medicine at Orlando College of Osteopathic Medicine (OCOM). He received his MD from Maulana Azad Medical College at Delhi University and completed his residency at Nassau County Medical Center.
Arvind Madan
Nephrologist
Expert Answer
First, make sure that the diaphragm and the bells of your stethoscope are clean, a dirty stethoscope with pieces of debris will cause interference while listening. Never put your stethoscope over your clothes because the fabric will also muffle the sounds. Also, make sure to keep the stethoscope tubing untangled and not touching your clothes to avoid static and other noises.
Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHowYesNo
Not Helpful 0Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Advertisement
Video
Tips
It's not a great idea to place your thumb over the bell (unused side) of the stethoscope when holding it because the thumb has its own pulse and could mess your count up. You might like to hold it with your thumb and index fingers spread out and parallel, with the sides of the chestpiece in the space between them.[7]
Thanks
Helpful0Not Helpful0
If you don't want to take clothing off it is also possible to place the stethoscope over the brachial artery, at the space where your elbow bends. To do this, expose your elbow and outstretch your arm so it is flat and put the diaphragm down, you will have to gently and slowly press softer to harder on your arm until you hear your pulse. For this you count all beats.[8]
Thanks
Helpful0Not Helpful0
You should consider using the stethoscope on bare skin to prevent it from picking up the sound of rustling fabric. The fabric can also soak up the sound and make your heart sound faint.
Thanks
Helpful0Not Helpful0
Show More Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Submit
Thanks for submitting a tip for review!
Advertisement
Warnings
If you do happen to hear anything other than the standard "lub-dub" sounds when you are listening to your heart, it may be beneficial to talk to your doctor about them, especially if you are feeling unusually sick. This would include anything you hear between "lub" and "dubs" or anything particularly high-pitched. Listen to recordings of normal heart sounds online to get an idea what your heart should sound like (although note that there is variation).
Thanks
Helpful2Not Helpful0
Be careful not to bump anything with the chestpiece of the stethoscope while it is in you ears, the sound will carry and this is loud and unpleasant!
Thanks
Helpful2Not Helpful0
Advertisement
You Might Also Like
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about using a stethoscope, check out our in-depth interview with Arvind Madan.
References
- ↑ https://www.adctoday.com/blog/intro-your-stethoscope
- ↑ http://www.madehow.com/Volume-1/Stethoscope.html
- ↑ https://www.registerednursern.com/apical-pulse-assessment-and-location/
- ↑ https://wwwn.cdc.gov/nchs/data/nhanes3/manuals/pressure.pdf
- ↑ https://www.rcm.org.uk/news-views-and-analysis/analysis/auscultation-the-art-of-listening
- ↑ https://www.scientificamerican.com/article/bring-science-home-stethoscope/
- ↑ https://www.nhs.uk/common-health-questions/accidents-first-aid-and-treatments/how-do-i-check-my-pulse/
- ↑ https://www.medicine.mcgill.ca/physio/vlab/cardio/auscul.htm
About This Article
Co-authored by:
Joel Warsh, MD
Board Certified Pediatrician
This article was co-authored by Joel Warsh, MD. Dr. Joel Warsh is a board certified Pediatrician and the Owner & Founder of Integrative Pediatrics and Medicine in Los Angeles, California. With over a decade of experience, Dr. Warsh specializes in holistic and integrative medicine. He holds a Bachelor’s degree in Kinesiology and Health Sciences, a Master’s degree in Epidemiology and Community Health, and a Doctor of Medicine (MD) from Thomas Jefferson Medical College, where he was elected president of the Jefferson Pediatric Society. Dr. Warsh then completed his Pediatric Residency at Children’s Hospital of Los Angeles (CHLA), where he received the George Donnell Society Research Fellow. This article has been viewed 134,683 times.
1 votes - 100%
Co-authors: 17
Updated: November 2, 2024
Views:134,683
Categories: Pulse Rate
Medical Disclaimer
The content of this article is not intended to be a substitute for professional medical advice, examination, diagnosis, or treatment. You should always contact your doctor or other qualified healthcare professional before starting, changing, or stopping any kind of health treatment.
Read More...
In other languages
Spanish
- Send fan mail to authors
Thanks to all authors for creating a page that has been read 134,683 times.
Reader Success Stories
Izzy D.
Sep 18, 2016
"So I thought my heart rate was 175, but I didn't realize you only count one part of the beat! That explains a..." more
More reader storiesHide reader stories
Did this article help you?
Advertisement